Leader Spiral Wound GasketsHigh Integrity SPW Gaskets

Leader Spiral Wound Gasket Type SRI

Contact

Ask Leader Gasket

Do you have a question? Feel free to contact us!

info@leadergt.com

Description

Spiral Wound Gaskets (SWG’s) are widely used as high integrity and sustainable gaskets. The sealing element is manufactured from preformed, V-shaped metallic windings with intermediate soft sealing fillers. Most used filler materials are Graphite and PTFE or LeaderTHERM NXT 1000 (high temp. modified Phlogopite). Due to the gasket construction, SWG’s offer high compressibility and recovery. Leader Style SRI SWG’s are provided with an innerand outer guide ring. These gaskets are suitable for ASME B16.5 raised faced flanges up to 2500 lbs and for EN/DIN flanges up to PN400.

Downloads

Product Data Sheet

Application

(Petro-) Chemical Industry, Steam, On- and Offshore exploration, pipeline systems, pressure vessels and exchangers.

Advtantages

Universal gasket. Blow out resistant!

Chemical Compatiblity

Spiral Wound Gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application/ compatibility guide is available on request.

Delivery Options

Standard style SRI gaskets are normally manufactured according to particular customer drawings, or by given sizes. Gaskets can be manufactured in a thickness of 2,5/3,2/4,5/6,4/7,2 mm. Different materials are available.

Temperature

Spiral Wound Gaskets "SRI" can be used in a wide variety of media, temperature acc. to used material(table of materials); standard SS316L - 100 °C up to 550 °C.

Approvals & Certificates

BAM
TA-Luft
Firesafe API 6FB
BAM
TA-Luft

Sealing Characteristics

low leak rate

Technical Data
max Temperature [°C]	See material table below
max Pressure [bar]	350
Minimum initial stress [DIN E 2505 part 2] [N/mm2]	50
Maximum initial stress [DIN E 2505 part 2] [N/mm2]	300
M-Value	3
Y- Value [psi]	10000
min Seating stress [Qmin(L 0,01), mg/(s*m)] at RT 40 bar [N/mm2]	33
Gasket required flange roughness [Ra micron]	3,2-6,3
max Seating stress [Qsmax bei RT EN13555] [n/mm2]	300
Relaxation PQR (30 MPA 150°C) [%]	0.92
Residual seating stress , [QA=40 MPA,Qmin(L 0,01), mg/(s*m)] bei RT 40 bar [N/mm2]	10
ROTT [Gb]	926
ROTT [a]	0.341
ROTT [Gs"]	2.9
min Temperature [°C]	See material table below

Leader Spiral Wound Gasket Type SI

Style “SI” SWG’s are with an inner ring and sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, LeaderTHERM NXT 1000....

Leader Spiral Wound Gasket Type SR

Style “SR” SWG’s are with an outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, LeaderTHERM NXT 1000....